On this page

By default, the email your Service Desk sends to customers (your replies, the "we have received your request" acknowledgement, status updates) comes from your channel address, for example acme-support@in.devstride.com. You can send it from an address on your own domain instead, such as support@yourcompany.com, so customers see the address they already know.

It takes three steps, all in settings:

  1. Add your domain on the Sending domains page (Settings → Email) and publish the DNS records DevStride shows you.
  2. Pick a From address on that domain for a channel address once the domain reads Verified.
  3. Send the forwarding test from the channel address, to prove mail sent to the new address comes back to DevStride.

Customer email starts carrying the new From address only after all three are done.

Nothing changes unless you add a domain

This is optional. An organization that adds no sending domain keeps sending from its channel addresses exactly as before, and no DNS work is ever needed for that.

What stays the same#

  • Replies still thread. Every email still carries a Reply-To on in.devstride.com, so when a customer clicks Reply, their answer lands on the same ticket as before. You don't change anything about your inbound mail.
  • Your forwarding rule stays. Your support inbox keeps forwarding to the channel address. The forwarding test (below) checks exactly that.
  • The sender name stays. The channel address's Reply-From name is still the name customers see, now beside your own address.

Add a sending domain#

  1. Open Settings → Email → Sending domains.
  2. Under Add a domain, enter a bare domain or subdomain you own, for example yourcompany.com or support.yourcompany.com (no @, http:// or path), and click Add.
  3. The domain appears with the DNS records to publish. Copy each Name and Value with the copy buttons beside them and add the records at your DNS provider.
Record What it's for
Three CNAME records marked Required Prove to receiving mail servers that DevStride may send for your domain (DKIM). The domain verifies once all three are found.
One TXT record marked Suggested if you have no DMARC record A starter DMARC policy (v=DMARC1; p=none;) at _dmarc. your domain. Skip it if your domain already publishes DMARC; don't add a second one.

A subdomain keeps your main domain's mail untouched

The records only add to your DNS; they don't change how your existing mail is delivered. If your IT team prefers to keep the main domain's DNS separate, add a subdomain such as support.yourcompany.com and send from an address on it.

Waiting for verification#

Each domain shows a status:

Status Meaning
Waiting for DNS The records haven't been found yet. Verification usually completes within an hour and can take up to 72 hours.
Verified The records are in place. Channel addresses can now be given a From address on this domain.
Not verified The records could not be verified. Any channel address using the domain sends from its channel address until they are, then switches back on its own.

DevStride re-checks every domain every hour, and the row shows when it was Last checked. To check right away after publishing the records, click Re-check.

When a domain can't be added#

  • A DevStride domain (such as in.devstride.com) is refused: add a domain your organization owns.
  • A domain another organization has registered is refused with …is already registered by another organization. A registration that never verifies stops holding the domain after 72 hours, so you can add it then.
  • Up to 10 sending domains per organization. Remove one you no longer use to add another.

Send a channel address's email from your domain#

  1. Open Settings → Email → Inbound addresses and click the pencil on the address.
  2. Under From address, choose your verified domain instead of Shared address (in.devstride.com).
  3. Type the part before the @ (for example support) and click Save. Letters, numbers, dots, hyphens and underscores are allowed.

Only verified domains are offered. If you have none yet, the field says: Verify a domain under Settings › Email › Sending domains to offer one here.

Prove forwarding with the test email#

Customers reply to the address they see, and some will write to it fresh. Before any customer email carries the new From address, DevStride checks that mail sent to it reaches your desk:

  1. Make sure your mailbox forwards mail for the new address (for example support@yourcompany.com) to the channel address, the same forwarding rule you set up when you created the channel address.
  2. Reopen the channel address (pencil) and click Send test under From address. DevStride sends one test email to your new address.
  3. The dialog reads Waiting for it to be forwarded back… while it waits, then Forwarding confirmed with the date once the test email arrives back.

From then on, customer email from this channel address is sent from your own address. The test email never becomes a ticket.

Your rule can redirect the message as it is, or forward it as a new message with the original inside. Either one confirms the test. The test email includes a line starting Please leave this line in the message, followed by a code. If your mailbox rewrites or trims mail before forwarding it, make sure that line stays in.

If nothing comes back within about 15 minutes, the test lapses and the dialog says the address is Not yet confirmed. Fix the forwarding rule and click Send test again.

Changing the From address starts over

Saving a different From address, or switching back to Shared address, clears the forwarding confirmation. Customer email goes out from the channel address until the new address passes its own test.

If a domain stops verifying#

If your DNS records are removed or changed, the hourly check marks the domain Not verified and every channel address using it falls back to sending from its channel address within the hour. Nothing is lost and replies keep threading. When the records are back and the domain verifies again, those channel addresses switch back to your own address on their own, with no need to repeat the forwarding test.

Remove a sending domain#

Click Remove on the domain and confirm Remove …? Channel addresses can no longer be given a From address on it.

A domain still in use is refused, naming the channel addresses that send from it: change their From address first, then remove the domain.

Who can do this#

Adding, re-checking and removing sending domains, choosing a channel address's From address and sending the forwarding test all need the Manage Service Desk Settings permission, the same one that manages channel addresses. See Permissions.

Powered by DevStride